FPV Drone GEPRC Mark5 HD O4 Pro DC PNP 6S

The GEPRC Mark5 HD O4 Pro DC 6S is a high-performance FPV drone engineered for cinematic and freestyle flying with DJI’s O4 Air Unit Pro. Featuring a 1/1.3" image sensor capable of 4K at 120fps and ultra-low latency 1080p transmission, this drone offers superior visual clarity. The robust frame includes an aluminum camera mount and silicone damping for stable footage. Powered by a TAKER F722 BT 50A stack and SPEEDX2 2107.5 1960KV motors, it delivers precise, smooth control. With Bluetooth tuning, quick-release arms, and a complete accessory pack, the Mark5 is ready for pro-level flight straight out of the box.

Features:

- Equipped with DJI O4 Air Unit Pro for clear, reliable video transmission.
- DC and wide-X frame options for different flying needs.
- Paired TAKER F722 BT 32Bit 50A stack with 2107.5 1960KV motors delivers ample power.
- Bluetooth tuning via mobile app makes adjustments effortless.
- Quick-release arms with two-screw swap for easy maintenance.
- Aluminum camera mount with silicone damping reduces vibration and resonance for the O4 Pro camera.
- Dedicated compartment for the capacitor and buzzer ensures a stable, jitter-free operation.
- Optimized frame damping reduces vibration, keeping electronics running smoothly.

Specifications:

Wheelbase: 230mm
VTX: DJI O4 Air Unit Pro
Camera: DJI O4 Air Unit Pro
Antenna: DJI O4 Air Unit Pro
Motor: SPEEDX2 2107.5 1960KV
Propeller: Gemfan 5136
Flight Controller: GEP-F722-BT-HD V3
MCU: STM32F722
IMU: ICM42688-P (SPI)
OSD: BetaFlight OSD with AT7456E
ESC: GEP-BL32 50A 96K 4-in-1
Power Connector: XT60EW-M
GPS (Optional): GEP-M10
Receiver: PNP / ELRS 2.4G / TBS NanoRX
Battery: LiPo 6S 1050–1550mAh (recommended)
Color: Emerald Green
Weight: 433.4g ± 5g
Flight Time: 6–8 minutes

Package includes:

1 x GEPRC MARK5 O4 Pro Drone
1 x Gemfan 5136 (2CW + 2CCW)
1 x 15×250mm Strap
2 x 20×250mm Straps
2 x Battery Anti-slip Pads
1 x 3D Printouts Pack
1 x Spare Screw Pack
1 x L-shaped Screwdriver (1.5mm, 2mm, 3mm)
1 x M8 Wrench

Spare Screws:

1 x M5 Flange Nylon Knurled Nut
2 x M2 Stainless Steel Press-fit Nuts
1 x M5×25 SS Button Head Hex Screw
4 x M3×10 Button Head Hex Screws
4 x M3×8 Button Head Hex Screws
2 x M3×8 Countersunk Hex Screws
2 x M3×5 Countersunk Hex Screws